RFID Three Part Inventory Control Tags
- Hang Tag / Magnetic Tag / Adhesive Label
- Each section is easily pulled apart
- All parts are scuff and tear resistant
- RFID, Barcodes and Human Readable all in one product
Related products
Description
For convenience in logistics and manufacturing applications, William Frick & Company has created an RFID Three Part Inventory Control Tag that works as a hang tag, magnetic tag and adhesive label. The three sections are connected by perforations. The printed bar code and human-readable information in each section ensure easy and accurate data collection no matter how the tag is read.
Additional information
| Model Number | WF-SM-MT-1 Three Part RFID Inventory Contral Tag |
|---|---|
| Applications | Barcode Labeling, Manufacturing, Outdoor Use, Warehouse |
| Material | Tear-resistant Polypropylene |
| Temperature Service Range | -40°F – 170°F |
| Expected Outdoor Life | 1 – 2 years |
| Water Resistance | Excellent |
| UV Resistance | Fair |
| Chemical Resistance | Very Good |
RFID Performance
| RFID Protocol | UHF Class 1 Gen 2 |
*Other single record and dual record chips available.
Tested Polarization:
Tag performance was experimentally measured in an anechoic chamber with a known set of experimental variables. The antenna used for measurements was linearly polzarized and of monostatic configuration. The direction of tested polarization is as follows.
Optimal Read Range* on Different Material Surfaces:
*Tag performance was measured free of material influence. Actual read ranges may differ depending on conditions such as environment, tag placements, hardware, etc.
